Super Simple Bunny Slippers FREE PATTERN!

What I absolutely LOVE about the Super Simple Slippers I make, is that they are incredibly adaptable!

I have made many different variations over time, and am happy to share some of them here with y'all !

Materials
Bulky (#5) Yarn - sample shown in Loops & Threads Charisma
- 2 colours (Main & Contrast)
H/8 (5mm) Hook
Yarn Needle

Abbreviations 
CH = chain    SLST = slip stitch      SC = single crochet      DC = double crochet
ST = stitch     HDC = half double crochet

Instructions

1. DC 10 times into Magic Ring, join with SLST to 1st DC {10}
2. CH2, place 2DC in each ST around, join with SLST to 1st DC {20}
3. CH2, DC in each ST around, join with SLST to 1st DC {20}
4. Repeat round 3
5. Repeat round 3
6. Repeat round 3
7. CH2, DC in next 15 STs, leave remaining 5 un-worked. Turn {15}
8. CH2, DC across, turn {15}
9. Repeat round 8
10. Repeat round 8
11. Repeat round 8
12. Repeat round 8
13. Repeat round 8
14. Repeat round 8
15. Repeat round 8

**you can continue to repeat round 8 until you've reached the desired length**

My feet are a size 7.5/8 and these fit snug, but will loosen over time. 

Fold the heel of your slipper so right sides are facing together, SLST the slipper heel closed

Fasten off and weave in ends

Using contrast colour

1. Join with SLST to heel, SC evenly around, join with SLST to 1st SC

2. CH1, SC evenly around, join with SLST to 1st SC

Fasten off, weave in ends.

Ears

Outer Ear (Make 4)

Using main colour

CH9, HDC in 2nd CH from hook and each one across, placing 3 HDCs in the last ST, then HDC in each stitch on the opposite side. 

CH1, turn. HDC in each ST across

Fasten off, leaving long tail to attach to slippers

Inner Ear (Make 4)

Using contrast colour

CH9, HDC in 2nd CH from hook and each one across, placing 3 HDCs in the last ST, then HDC in each stitch on the opposite side. 

Fasten off, leaving long tail to attach to Outer Ear

Attach inner ear to outer ear, & taper the end as shown;

Sew ear onto slippers. 

Bunny Tail

Make two pom-poms (there are many tutorials to be found online for this) 

I wrapped a strand of yarn around all four of my fingers 24 times, then tied them together and cut the ends to make my pom-poms. 

Sew onto the back of the slippers. 

There you have it! Bunny slippers

I hope you've enjoyed this pattern! 

**** please note that none of my FREE PATTERNS have been tested, aside from being worked up by me. If you find any errors, or have difficulty with the pattern, please feel free to contact me or comment here!
Thank you!

Super Simple Slippers FREE PATTERN

Materials
Bulky (#5) Yarn - sample shown in Loops & Threads Charisma
- 2 colours
H/8 (5mm) Hook
Yarn Needle

Abbreviations 
CH = chain    SLST = slip stitch      SC = single crochet      DC = double crochet      TR = triple crochet
ST = stitch

Instructions

1. DC 10 times into Magic Ring, join with SLST to 1st DC {10}
2. CH2, place 2DC in each ST around, join with SLST to 1st DC {20}
3. CH2, DC in each ST around, join with SLST to 1st DC {20}
4. Repeat round 3
5. Repeat round 3
6. Repeat round 3
7. CH2, DC in next 15 STs, leave remaining 5 un-worked. Turn {15}
8. CH2, DC across, turn {15}
9. Repeat round 8
10. Repeat round 8
11. Repeat round 8
12. Repeat round 8
13. Repeat round 8
14. Repeat round 8
15. Repeat round 8

**you can continue to repeat round 8 until you've reached the desired length**

My feet are a size 7.5/8 and these fit snug, but will loosen over time. 

Fold the heel of your slipper so right sides are facing together, SLST the slipper heel closed

Fasten off and weave in ends

Using contrast colour

1. Join with SLST to heel, SC evenly around, join with SLST to 1st SC

2. CH1, SC evenly around, join with SLST to 1st SC

Fasten off, weave in ends. 

BOW

CH5, TR 4 times into 5th CH from hook, CH4, SLST into same ST, CH4, TR 4 times, CH4, SLST

Fasten off leaving a long tail (18") Wrap the tail around the center of the bow approx. 6-8 times, tie it tight

Sew bow into slipper - I chose to put mine front and center. 

There you have it! 

Hope you enjoy 

xoxo

**** please note that none of my FREE PATTERNS have been tested, aside from being worked up by me. If you find any errors, or have difficulty with the pattern, please feel free to contact me or comment here!
Thank you!

Spectacles Case ~ FREE PATTERN

I've had a few requests to make a case for regular glasses and sunglasses.

I am sure there are plenty of different patterns out there on the world-wide-web ... but I had something specific in mind and went to work to make it happen.

Super simple! Super adaptable!

Here it is;

Spectacles Case

Materials
Worsted Weight (#4) Yarn ~ I used scraps of 100% Cotton
H/8 (5mm) Hook
Yarn Needle - to weave in those pesky tails
Button

Optional Materials
Coordinating Fabric - felt or something soft, keeping the lenses in mind
Sewing Needle
Coordinating Thread

Abbreviations
ST = stitch      SLST = slip stitch      CH = chain      SC = Single Crochet

Pattern Notes
* This pattern is worked in the round - with right side facing you
* You will be joining with a SLST at the end of each round
* You will change your working colour after EACH row AND you will carry each colour up on the inside of your work - DO NOT FASTEN OFF UNTIL END

I used 4 different colours here - I think it would look really fun with each row as a different colour! 

Instructions

1 - colour 1 - Chain 50 - join with SLST to beginning CH to form circle. Careful not to twist your CH
2 - colour 1 - CH1, SC in each CH space around {50 SC} (join, change colour)
3 - colour 2 - CH1, SC, *CH1, skip 1 st, SC in next st* repeat from *to* around. Join with SLST to beginning SC, changing colour

4 - colour 1 - repeat Round 3

5 - colour 3 - repeat Round 3

6 - colour 1 - repeat Round 3
7 - colour 4 - repeat Round 3
8 - colour 1 - repeat Round 3
9 - colour 2 - repeat Round 3
10 - colour 1 - repeat Round 3
11 - colour 3 - repeat Round 3
12 - colour 1 - repeat Round 3
13 - colour 4 - repeat Round 3
14 - colour 1 - CH1, SC, *CH1, skip 1 st, SC in next st* repeat from *to* around. Join with SLST to beginning SC
~ place your seam (joining point) on the side of your work ~
15 - colour 1 - CH1, SC, *CH1, skip 1 st, SC in next st* repeat from *to* until you reach the middle point, chain 8 (or more depending on your button size), repeat from *to* around to end. Join with SLST to beginning SC

Position your button on the opposite side, making sure the loop will fit over snug, but not too snug. Sew into place.

Turn inside out ~ SLST bottom closed ~ Fasten off and weave in all ends

Turn it right side out, and there you have it!
A super-stylin' spectacles case!

OPTIONAL 
You can take a piece of fabric, measure it to fit inside, and hand-sew it into place.

This pattern is extremely adjustable. Just chain an even number of stitches, and make it the appropriate size of what you want in it!
For example, your smart phone, tablet or even your laptop!

You are welcome to do as you wish with the items you make from this pattern - donate it to charity, gift it, sell it ... I do ask however that you do not copy this pattern in part or whole, or claim it (or the pictures within) as your own. Please give credit where credit is due.

Love the pattern? Please share it! 

Thank you ~ !

** please note that my FREE patterns are not tested by anyone other than myself. If you notice any mistakes, or have any questions, please let me know!
Thank you~!